This new universal tester maps cables, detects good
connections, opens, shorts or crosses. It works with
over 20 types of cables including: LAN & telephone,
Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire,
PS/2 keyboard & parallel printer.
Features
Auto scan or manual scan modes
Rubber feet to grip to desk or bench to prevent
slipping
Power shuts off after 30 seconds of non-use to
conserve battery
Rugged case now with built-in handle for easy
transport
9V battery included
Tests cables with the following terminations:
Modular plugs: RJ45, RJ11, RJ12 UTP/STP
Coaxial: BNCs & CATV "F" (BNC-to-F adapter
required; not included)
D-sub: 9-, 15- & 25-pin
HD-sub: 15-pin
USB: A, B, & mini 5-pin
1394 FireWire: 4- & 6-pin
Centronics: 36-pin printer
Advantages
Universal tester for all computer cables
Quickly & easily troubleshoot or map cable
pin-out
Easy to read & understand with LED indicator
lights
LAN ProNavigator Tester and RemoteIf
you’re a technician on the go, you need the LAN ProNavigator™ from Paladin
Tools! Two-piece tester includes main unit and remote with test results at
both ends. Features: One-button, simple testing (PASS/FAIL or fault find)
Traces wires with tone & remote lights Quick fault analysis on coax & data
cables CAT-5, CAT-5e or CAT-6 (UTP/STP) cable testing Detects Opens,
Shorts, Crossed Wires & Split Pairs Compact & lightweight, comfortable to
hold Designed & manufactured in the USA Test status lights at both
ends (main unit & remote) Specifications: Simple PASS/FAIL test
results in one second allows technicians to quickly move on to the next test
site. Generates oscillating audio tone for use with tone probes to
locate cables. Tests data and telephone cables up to 320 feet (100 meters)
for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T,
and common Category 5 configurations. Tests unshielded UTP and shielded STP
data cable. Detects good connections, open connections, crossed wires
and split pairs. Tests common BNC connected 50 and 75 ohm coaxial cables up
to 320 feet (100 meters) for continuity. Tests coaxial cable types RG58,
RG59, RG6, RG6 Quad, Belden 8281, RG8, RG11 and more. Shows test
results at both ends of cable. Belt clips provided and lanyard holes
embedded in case to attach to belt or wrist. Uses standard 9-volt dc battery
with auto-off function to preserve battery life. One-year warranty
1543 includes test set (main and
remote), 2 RJ45 Patch cords, 2 belt clips
901066 includes test set (main and
remote), 2 RJ45 Patch cords, 2 BNC coaxial cables, 2 CATV "F"to BNC
adapters, 1BNC/BNC adapter, 1 shielded RJ45 coupler, 2 belt clips in durable
case
If
you’re a technician on the go, you need the LAN ProNavigator™ from Paladin
Tools! Two-piece tester includes main unit and remote with test results at
both ends. Features: One-button, simple testing (PASS/FAIL or fault find)
Traces wires with tone & remote lights Quick fault analysis on coax & data
cables CAT-5, CAT-5e or CAT-6 (UTP/STP) cable testing Detects Opens,
Shorts, Crossed Wires & Split Pairs Compact & lightweight, comfortable to
hold Designed & manufactured in the USA Test status lights at both
ends (main unit & remote) Specifications: Simple PASS/FAIL test
results in one second allows technicians to quickly move on to the next test
site. Generates oscillating audio tone for use with tone probes to
locate cables. Tests data and telephone cables up to 320 feet (100 meters)
for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T,
and common Category 5 configurations. Tests unshielded UTP and shielded STP
data cable. Detects good connections, open connections, crossed wires
and split pairs. Tests common BNC connected 50 and 75 ohm coaxial cables up
to 320 feet (100 meters) for continuity. Tests coaxial cable types RG58,
RG59, RG6, RG6 Quad, Belden 8281, RG8, RG11 and more. Shows test
results at both ends of cable. Belt clips provided and lanyard holes
embedded in case to attach to belt or wrist. Uses standard 9-volt dc battery
with auto-off function to preserve battery life. One-year warranty
