Provides the ability to monitor a circuit without disruption by providing a convenient interface between the center port and a buttset, or other clamp-on type instrument

Standard Modular Adapter is economical, convenient, small, and has a handy pocket clip.

• Four contacts marked for proper termination

• Durable plastic body with riveted spring clip to attach to pocket or pouch 

Banjo Modular Adapters
The Banjo Modular Adapters are designed to permit testing on working lines, and allow circuit access without disrupting service. Sturdy copper contacts are angled to prevent alligator clips from falling off during testing. Small holes in each contact allow insertion of test probes. All circuits are clearly marked on sides and bottom of the Banjo adapters.
Banjo Modular Adapters available with 4, 6,and 8 wire (RJ11, RJ45)
Banjo Modular Adapters available with numbered contacts and no interruption of service design
Durable, high impact plastic design; outside plant resistant
Banjo Modular Adapter allows for replace-able line cords
 The Banjo adapter is available in four, six, or eight wire configuration for voice and data applications. They have a heavy duty, molded-in clip for attaching to shirt pocket or tool pouch.

This modular adapter allows in-line testing for any plug/jack combination. It includes two 4-pair jacks plus a 152mm (6 in.) modular cord terminated with our patented 4-pair “universal” plug for accessing any standard 6- or 8-position jack. Individual conductors are broken out by pin number and correspond to eight separate test pads. Test equipment can be securely attached to the test pads using alligator clips. For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the Modapt® body. When used with Siemon’s TESTAR® adapter, S110® test adapter, and S110T disconnect test adapters the Modapt® can be used to test connections on S66M, S110T disconnect blocks, and S110® blocks
 

TAP-50® Adapter - The TAP-50® is designed for accessing all 25-pairs on a 66M block. A positive connection with the quick clip ensures accurate testing, and our dual-handled design makes for easy installation and removal. It can also be used to field-connectorize 66M blocks. Available with either male or female 25-pair connectors.

Siemon 1,2,3 and 4 pair test adapters provide a convenient way to test 110 connecting blocks. The adapters plug into any 110 connecting block and provide a modular jack for connection to test equipment or patch cords. It is the only 110 test adapter that can be attached to both terminated and unterminated 110 connecting blocks without disturbing the terminated conductors. All adapters (except for the on pair version) are Stackable.  
 

The TESTAR provides easy test access to 66 quick clips.  it plugs directly onto a 66M Block, establishing a positive connection and provides modular jack interface for plugging in test equipment.  To utilize equipment requiring alligator clips, the MODAPT adapter can be plugged into the TESTAR.

The Harris ADSL / POTS Splitter is the first hand-held splitter in the field with bridging capability - it can troubleshoot the permanent-installed POTS splitter at the NID without downing the ADSL service. The ADSL Splitter is also tough, small and lightweight enough to be used every day by field technicians in conjunction with a butt-in test set. (Harris recommends ADSLSafe™ test set for full data protection.) Perhaps most important to technicians who work with business customers, the ADSL/ POTS Splitter can draw a dial tone from anywhere on the line without downing ADSL service.